Netgear WC7500-Wireless User Manual - Page 347

ProSAFE Wireless Controller The wireless controller's login window opens. 2. Enter your user name and password. 3. Click the Login button. The wireless controller's web management interface opens and displays the Summary page. 4. Select Monitor > Controller > AirQual. The AP List includes the WAC740 access points for which AirQual is enabled. (In the previous figure, AirQual is enabled for a single WAC740 access point only.) 5. If the AP List includes more than one WAC740 access point, select the radio button for a WAC740 access point. The page adjust to display the utilization, interference, and logs for the Wifi network of the profile group that the WAC740 access point monitors. On the right side of the page, the Channel Utilization graphic illustrates the percentage of utilization for each individual channel in both radio bands of the WiFi network and the Spectral Interference Map graphic illustrates the percentage of non-WLAN interference for each individual channel of both radio bands in the WiFi network. The following table describes the fields of the AirQual Logs table. Field Severity Description Raised TIme Interference Type Description The severity of the interference (Normal or Major). The description of the interference event and the impacted channel or channels. The time at which the interference was detected. The type alert (for example, quality is below threshold) or type of interference (for example, FHSS Cordless Phone or Handset, or Microwave Oven). 6. To sort the table, click the double triangle icon or single triangle icon at the top right of a column. Monitor the WiFi Network and Its Components 347