Netgear WC7500-Wireless User Manual - Page 77

ProSAFE Wireless Controller 8. Specify the access point settings as described in the following table. Setting AP name AP Model Price($) IP Address AP Type Description Description Enter a name for the access point. By default, the access points are numbered, for example, AP-16. Specify the access point that you intend to use for the floor: 1. Click the Browse button. The access points that the wireless controller supports display in a pop-up window. 2. Click the access point. All calculations are performed with the selected access point. 3. Click the Confirm button. Your settings are saved and the pop-up window closes. As an option, enter the price of the access point. As an option, enter the IP address of the access point. Note: If your network uses a DHCP server and a deployed access point receives an IP address automatically, you can enter any IP address. If you intend to assign a static IP address to a deployed access point, enter the IP address that you want to set aside for the access point. When you select an access point, this field is populated automatically. As an option, enter a description for the access point. RF Planning and Deployment 77