Netgear WC7500-Wireless User Manual - Page 306

ProSAFE Wireless Controller 6. Configure the settings as described in the following table. Setting Description Controller IP Enter the IP address of the redundant controller. This is the address that you use to log in to the redundant controller's web management interface. UserName The user name is a nonconfigurable field that displays the user name with which you log in to the web management interface of the redundant controller. By default, the user name is admin. Password Enter the password with which you log in to the web management interface of the redundant controller. If you did not yet personalize the password, enter password for the password. 7. Click the Apply button. Your settings are saved. The Secondary IP field displays the IP address of the redundant controller (that is, the secondary controller). Remove a Redundancy Group You can remove an existing redundancy group. In a 1:1 redundancy group, the primary controller is returned to a standalone configuration without redundancy. In a N:1 redundancy group, the primary controllers are returned to a stacked configuration without redundancy. After you remove a redundant controller, reset the redundant controller to its factory default configuration before you use the controller in another configuration. Manage Stacking and Redundancy 306