Netgear WC7500-Wireless User Manual - Page 167

ProSAFE Wireless Controller After the access points are added to the Managed AP List, the wireless controller upgrades the firmware of the access points to the latest firmware that is loaded on the wireless controller, and the access points become managed access points. Depending on the number of access points that you add to the Managed AP List, this process might take several minutes. By default, the access point upgrade process uses multicast. If you must configure a specific multicast IP address range for the upgrade process or disable multicast, see Configure Multicast Firmware Upgrade for Access Points on page 278. If one or more access points do not transition to the Connected state (see the Status column in the Managed AP List), see Resolve Problems With Access Points on page 365. For information about how to manage the Managed AP List, see Manage the Managed AP List on page 167. Manage the Managed AP List After you add discovered access points to the Managed AP List, you can view the status of the access points on the list, change information for selected access point on the list, and remove access points from the list. View the Managed AP List The managed AP List displays the status, IP addresses, MAC addresses, model numbers, names, and other information for the managed access points.  To view the status and other information for managed access points: 1. Open a web browser, and in the browser's address field, type the wireless controller's IP address. By default, the IP address is 192.168.0.250. Discover and Manage Access Points 167