Netgear WC7500-Wireless User Manual - Page 277

ProSAFE Wireless Controller Reboot Access Points Under normal circumstances, you do not need to reboot an access point. If a problem occurs with an access point, you can reboot it to see if this resolves the problem.  To reboot an access point: 1. Open a web browser, and in the browser's address field, type the wireless controller's IP address. By default, the IP address is 192.168.0.250. The wireless controller's login window opens. 2. Enter your user name and password. 3. Click the Login button. The wireless controller's web management interface opens and displays the Summary page. 4. Select Maintenance > Reboot/Reset > Access Points. 5. To find the access point that you want to reboot, in the Search field, enter the IP address, MAC address, model, or name of the access point, or enter other information to narrow down the information that is displayed in the table. The table displays only the access point or access points that match the information that you entered in the Search field. 6. Take one of the following actions: • Select a single access point by selecting the check box to the right of the access point. • Make a selection of access points by selecting the check boxes to the right of the access points. • Select all access points by selecting the check box in the upper right of the table heading. 7. Click the Reboot button. The selected access point or access points are rebooted. Maintain the Wireless Controller and Access Points 277