Netgear WC7500-Wireless User Manual - Page 204

ProSAFE Wireless Controller 5. Configure the settings as described in the following table. Setting Enable/Disable Channel Quality Threshold Channel Utilization Threshold Description Select the Enable/Disable check box to enable AirQual. By default, the Enable/Disable check box is cleared and AirQual is disabled. Note: If you enable AirQual in a WiFi network that does not include WAC740 access points, AirQual does not take effect. Move the Channel Quality Threshold slider to the threshold position or enter a number from 1 to 100 in the associated field. If the channel quality exceeds the threshold, the wireless controller generates an alert. By default, the threshold position is 0, which effectively disables the channel quality feature. Move the Channel Utilization Threshold slider to the threshold position or enter a number from 1 to 100 in the associated field. If the channel utilization exceeds the threshold, the wireless controller generates an alert. By default, the threshold position is 0, which effectively disables the channel utilization feature. 6. In the table with WAC740 access points, select the check box for the WAC740 access point that must monitor AirQual for the profile group. If a WAC740 access point is not assigned to the profile group, you cannot monitor AirQual for the profile group. 7. Make sure that the selection from the Enable/Disable menu is Enable. This option makes it possible to change AirQual monitoring from one WAC740 access point in the profile group to another one. That is, if more than one WAC740 access point is assigned to the profile group, you could disable AirQual for one WAC access point and enable it on another WAC740 access point without the need to disable the AirQual feature entirely. The only available selection from the Mode menu is Dedicated. Configure WiFi and QoS Settings 204