Netgear WC7500-Wireless User Manual - Page 389

ProSAFE Wireless Controller Password Requirements Note: We recommend that you change the administrator password of the wireless controller to a secure password (see Change the Password of the Default admin Account of the Wireless Controller on page 237). The administrator password that you configure on the wireless controller is also pushed to all managed access points. The following table lists the password requirements. Table 15. Password requirements Web Management Interface Path User Type or Data Encryption Restrictions Allowed Characters Length Section in This Manual Select Maintenance > User Management. 1. Select Maintenance > User Management. 2. Click the Captive Portal Users tab. • Administrator Alphanumerics and Up to 31 • Read Only special characters • Guest Provisioning (see footnote 1) • License Management Only Captive portal user Alphanumerics and Up to 31 special characters See Manage Users, Accounts, and Passwords on page 236. 1. Select Maintenance > User Management. 2. Click the WiFi Clients tab. WiFi user Alphanumerics only Up to 31 Basic profile: Shared Key 64-bit WEP 1. Select Configuration > Profile > Basic > Radio. 2. Select a profile. 3. Make a selection from the Network Authentication menu. WPA-PSK WPA2-PSK 128-bit WEP 152-bit WEP TKIP TKIP + AES AES TKIP + AES Hexadecimal 10 fixed Hexadecimal 26 fixed Hexadecimal 32 fixed Alphanumerics and Up to 63 special characters, excluding quotes See Manage Security Profiles for the Basic Profile Group on page 124. WPA-PSK TKIP + AES & WPA2-PSK Factory Default Settings, Technical Specifications, and Passwords Requirements 389