Netgear WC7500-Wireless User Manual - Page 325

ProSAFE Wireless Controller  To view the wireless controller Summary page: 1. Open a web browser, and in the browser's address field, type the wireless controller's IP address. By default, the IP address is 192.168.0.250. The wireless controller's login window opens. 2. Enter your user name and password. 3. Click the Login button. The wireless controller's web management interface opens and displays the Summary page. 4. Select Monitor > Controller > Summary. The following table describes the fields of the Network Status, Wireless Clients, Most Active APs, Most Active Clients, and Most Active SSIDs tables of the page. The Controller Info section is self-explanatory. Note: If you configure redundant controllers, the page also displays information about the status of the redundancy configuration. This information is self-explanatory. Item Network Status Total Up Down Alarms Critical Major Description The total number of managed devices that are running correctly. The total number of managed devices that cannot be pinged. The wireless controller can ping these managed devices, but either cannot log in or detected that these devices are different from the ones that were configured. The number of managed devices for which the configuration differs from the one that is set on the wireless controller. This situation occurs most likely because the device runs outdated firmware or the wireless controller changed the configuration while the device was down or offline. Monitor the WiFi Network and Its Components 325