Oki B930dn User Guide (English) - Page 102

• The setup procedures and commands may vary according to different versions of OS. Refer to the manuals that came with the workstation for the details. • To setup the printer, the user must be a superuser. Contact your network administrator to perform the setup if you do not have the authority of a superuser. • The print language/mode is determined by the printer model and configuration. Before setting a UNIX workstation, check the available languages/modes. • To specify multiple entries for the logical printer, make sure each printer entry is assigned its own unique spool directory. If a single spool directory is used for multiple printer entries, the printer select option may not function correctly. PRINTING FROM WINDOWS Take note of the following when printing from Windows: • In the spool mode, if the print data is bigger than the remaining capacity of the hard disk or the memory at the point of receiving, the data will not be received by the printer. NOTE > Some client computers may re-send immediately when the print data has exceeded the receiving capacity. When this occurs, the client appears as if it has crashed. To rectify this situation, the client computer must be stopped from sending print data. > In the non-spool mode, printing will commence once data starts to be received by the printer. Therefore, if the printer has accepted a print request from a computer, it will not receive another print request from another computer. > For PCL and DUMP, the specification for the number of copies is invalid. PRINTING FROM UNIX Take note of the following when printing from UNIX: B930n User's Guide> 96