Oki B930dn User Guide (English) - Page 123
When Using Unix, CAUSE, ACTION
View all Oki B930dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
WHEN USING UNIX The printer is not Printing CAUSE VERIFICATION ACTION Incorrect IP address. Error occurs on the network connecting the workstation and the printer. Unable to set the correct printer entry on the workstation. The printer is in the offline status. If LPD spool is set to [On], the print data sent by the user in a single print instruction has exceeded the remaining storage capacity of the destination device. An irrecoverable error has occurred during print. Ask the network administrator to check if the IP address is correct Activate the network test mode (ping) on the workstation to check the communication status. Check and correct the printer entry settings on the workstation. Check the/etc/ printcap file on the workstation or use the lpstat command to troubleshoot. Check whether Off-line is displayed on the printer Operator Panel. Check the remaining storage capacity of the destination device. Check the error message on the printer Operator Panel. Set up the correct IP address for the printer. As the network administrator to look into the network failure. Re-enter the correct printer entry. Press the button. 1. If single print data has exceeded the storage capacity of the destination device, free space on the device, or split the file into smaller ones to keep them below the remaining storage space 2. If multiple files have exceeded the storage of the destination device, reduce the number of files which can be sent at a time. Switch off the printer, then switch it on again. B930n User's Guide> 127