Oki B930dn User Guide (English) - Page 103

Print • In the spool mode, up to 32 files can be printed by one command. Files that come after the 32nd file will be ignored. An instruction with more than 32 files will be treated by the printer as a print request of up to 32 files. • In the spool mode, if the print data is bigger than the remaining capacity of the hard disk or the memory at the point of receiving, the data will not be received by the printer. NOTE > Some client workstations may re-send immediately when the print data has exceeded the receiving capacity. When this occurs, the client workstation appears as if it has crashed. To rectify this situation, the client must be stopped from sending print data. > In the non-spool mode, multiple files can be printed by issuing one command. Furthermore, the number of files is not limited. > In the non-spool mode, printing will commence once the data starts to be received by the printer. Therefore, if the printer has accepted a print request from a client workstation, it will not receive another print request from another client workstation. > Options, such as -m option, not processed by the workstation which sends the print instructions will not be valid. > For PCL and DUMP, the specification for the number of copies is invalid. Delete • Print data which consists of multiple files sent in one print instruction, cannot be deleted file by file. All the files will be deleted at one go. • This command will become invalid if it is executed without options having been specified or if there is no print data which matches the option. • A workstation can only delete print data it has sent. It cannot delete print data sent by other workstations. B930n User's Guide> 97