Sony HDR-FX1 Operating Instructions - Page 16
Step 5: Setting the date and time - case
UPC - 027242654815
View all Sony HDR-FX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
When the picture in the viewfinder is hard to see If you cannot see the picture in the viewfinder clearly under bright circumstances, use the supplied large eyecup. To attach the large eyecup, stretch it a little and align it with the groove of the viewfinder, then slide it up to the end. You can attach the large eyecup facing either the right or left side. Large eyecup (supplied) Step 5: Setting the date and time Set the date and time when using this camcorder for the first time. If you do not set the date and time, the [CLOCK SET] screen appears every time you turn on your camcorder. b Note • If you do not use your camcorder for about 3 months, the built-in rechargeable button-type battery gets discharged and the date and time settings may be cleared from the memory. In that case, charge the rechargeable button-type battery (p. 97) and then set the date and time again. z Tip • To select the brightness of the viewfinder backlight when you are using the battery pack, select (LCD/VF SET) menu, then [VF B.LIGHT] (p. 58). POWER switch 1 Turn on your camcorder (p. 14). 2 Open the LCD panel and adjust the angle. Proceed to step 6 when you set the clock for the first time. 16 Getting started