Sony HDR-FX1 Operating Instructions - Page 85
LCD screen/viewfinder, Recording
UPC - 027242654815
View all Sony HDR-FX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
LCD screen/viewfinder Symptom Cause and/or Corrective Actions An unknown language appears on the cSee page 18. screen. An unknown indicator appears on the cRefer to the indicator list (p. 106). screen. The picture in the viewfinder is not cUse the viewfinder lens adjustment lever to adjust the lens (p. 15). clear. The picture in the viewfinder has disappeared. cClose the LCD panel. The picture is not displayed in the viewfinder when the LCD panel is open (p. 15). Recording Troubleshooting Symptom Cause and/or Corrective Actions The tape does not start when you press REC START/STOP. cSet the POWER switch to CAMERA (p. 14). cThe tape has reached the end. Rewind it, or insert a new cassette. cSet the write-protect tab to REC or insert a new cassette (p. 91). cThe tape is stuck to the drum due to moisture condensation. Remove the cassette and leave your camcorder for at least 1 hour, then re-insert the cassette (p. 95). The tape does not start when you press REC START/STOP on the handle. cRelease the HOLD lever (p. 21). The power abruptly turns off. cCharge the battery pack (p. 11). The zoom does not function. cSet the ZOOM switch correctly (p. 22). cWhen using the zoom lever on the Remote Commander, set the ZOOM switch to LEVER/REMOTE (p. 23). The handle zoom does not work. cSet the handle zoom switch to H or L (p. 22). Zoom or shot transition stops in the middle of the operation. • This occurs when you replace a cassette during the operation (when the camcorder is connected to another recording device for the purpose of backup recording). The SteadyShot does not function. cSet [STEADYSHOT] to [ON] in the (CAMERA SET) menu (p. 54). cPress the ASSIGN button assigned to the SteadyShot (p. 68). The auto focus does not function. cSet the FOCUS switch to AUTO to enable auto focus (p. 32). cThe recording conditions are not suitable for auto focus. Adjust the focus manually (p. 32). A vertical band appears when • This occurs when the contrast between the subject and the background is recording candlelight or electric light too high. This is not a malfunction. in the dark. ,continued Troubleshooting 85