Sony HDR-FX1 Operating Instructions - Page 49
Locating a scene on a tape for playback, Searching quickly for a desired scene - Zero set memory
UPC - 027242654815
View all Sony HDR-FX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
When your TV is connected to a VCR Connect your camcorder to the LINE IN input on the VCR using the A/V connecting cable. Set the input selector on the VCR to LINE. When your TV is monaural (When your TV has only one audio input jack) Connect the yellow plug of the A/V connecting cable to the video input jack and connect the white or the red plug to the audio input jack of your TV or VCR. When you want to play the sound in monaural mode, use a connecting cable (optional) for that purpose. b Note • Pictures in the DV format are not output from the COMPONENT OUT jack, if copyright protection signals are recorded in the pictures. Locating a scene on a tape for playback Searching quickly for a desired scene - Zero set memory Playback 1 During playback, press ZERO SET MEMORY on your camcorder or Remote Commander at the point you want to locate later on. The tape counter is reset to "0:00:00" and appears on the screen. If the tape counter is not displayed, press DISPALY/BATT INFO. 2 Press x (stop) when you want to stop playback. 3 Press m (rewind). The tape stops automatically when the tape counter reaches "0:00:00." 4 Press N (play). The playback starts from the point designated "0:00:00" on the tape counter. ,continued Playback 49