Canon PowerShot SX60 HS User Guide - Page 23

4 Shoot. Shooting Still Images 1) Focus. ●●Press the shutter button lightly, halfway down. The camera beeps twice after focusing, and AF frames are displayed to indicate image areas in focus. ●●If [Raise the flash] is displayed, lift the flash with your finger to prepare it for use. If you prefer not to use the flash, push it down with your finger, into the camera. 2) Shoot. ●●Press the shutter button all the way down. ●●As the camera shoots, a shutter sound is played, and in low-light conditions when you have raised the flash, it fires automatically. ●●Keep the camera still until the shutter sound ends. ●●After displaying your shot, the camera will revert to the shooting screen. Shooting Movies 1) Start shooting. ●●Press the movie button. The camera beeps once as recording begins, and [ Rec] is displayed with the elapsed (1) time (1). ●●Black bars are displayed on the top and bottom edges of the screen, and the subject is slightly enlarged. The black bars indicate image areas not recorded. ●●Frames displayed around any detected faces indicate that they are in focus. ●●Once recording begins, take your finger off the movie button. 2) Finish shooting. ●●Press the movie button again to stop shooting. The camera beeps twice as recording stops. Before Use Basic Guide Advanced Guide 1 Camera Basics 2 Auto Mode / Hybrid Auto Mode 3 Other Shooting Modes 4 P Mode 5 Tv, Av, M, C1, and C2 Mode 6 Playback Mode 7 Wi-Fi Functions 8 Setting Menu 9 Accessories 10 Appendix Index 23