Dell EqualLogic PS6210XS EqualLogic Group Manager Administrator s Guide PS Ser - Page 369

Attribute IP addresses Applies to Description IP address specified in the access point, if applicable. Requires that access policies be expanded so that access points are shown. Indicates whether an extended access point or access policy is to be applied to both the volume and its snapshots, the volume only, or the snapshot only. You can edit the Applies to parameter directly from the subpanel. Access Control List Panel (for selected volume) Table 73. Access Control List Panel Field iSCSI access Access type Multiple access Access policy groups Name Description Type of iSCSI access for the volume. Type of read access for the volume. Type of access allowed for multiple iSCSI initiators. Names of any policy groups associated with the selected volume. To configure an access policy group for this volume, click the Add link. Description Applies to Access policies Policy Description of the policy group Either volumes and snapshots, volumes only, or snapshots only Name of one or more access policies for the selected volume. If you want to add more policies (up to 3), or modify or delete an existing policy, click the links at the top-right corner of the panel. CHAP account iSCSI initiator IP addresses Applies to Basic access points Description CHAP user name for the policy, if specified Name of the initiator for the policy, if specified Any IP addresses for the policy, if specified Either volumes and snapshots, volumes only, or snapshots only Description of the new basic access point for the selected volume. To create a new basic access point for the volume, click the New link. You must supply at least one of the following Access point applies to Specify a CHAP account name, an iSCSI initiator name, and/or an IP address for the basic access point. You must specify at least one of these elements. Either volumes and snapshots, volumes only, or snapshots only Reference: GUI Panels, Wizards, and Dialog Boxes 369