Dell EqualLogic PS6210XS EqualLogic Group Manager Administrator s Guide PS Ser - Page 435

Field Phase Progress Actions Description Shortcut • error - Client cannot find the file specified by the user, either because the file has not been created yet (the copy is not complete) or the correct file or location was not provided. • running - Data transfer is currently in progress. • need more files - When manually replicating a volume, if you need to break it into segments (usually due to space limits) this message is displayed when MTU is done copying that segment. For example, if you are copying a 15TB volume and the device can only hold 3TB, set the segment size to 3TB and copy only one segment at a time. When it reaches the 3TB capacity, MTU stops and displays the need more files message. Either load the next segment or get another device, and continue the copy operation. • interrupted - The transfer operation was stopped. To continue creating or loading files, click Resume. If you interrupt and then resume a copy operation, MTU creates the next file in the sequence. The interrupted transfer file might be smaller than the other files, but is still valid. All the transfer files are used during the load operation on the receiving group. If you interrupt and then resume a load operation, the operation continues loading data from the same transfer file that was in progress. Phase of the operation: • Copy - Copying the data to be transferred • Verify - Checks for errors in the data that was written in the transfer file • Load - Loads the copied data to the intended computer Percentage progress bar of the manual transfer operation Provides links that enable you to: • View details about a transfer The details are displayed in the Copy data from volume to file pop-up window. • Delete a transfer - Before you can delete a task, the task must be in a stopped state. You cannot delete a running task. If a task that you intend to delete is still running, stop it first. - Choose options in the Delete task confirmation dialog box to continue. • Stop a transfer - When you stop a running task, you can subsequently restart or delete the stopped task by using the Group Manager icons that are displayed after the task is stopped. - Click Yes or No in the Stop data transfer confirmation dialog box to continue. • Resume a stopped transfer Use the Resume Data Transfer wizard to resume the transfer operation. Reference: GUI Panels, Wizards, and Dialog Boxes 435