Dell EqualLogic PS6210XS EqualLogic Group Manager Administrator s Guide PS Ser - Page 476

Member Health Status Panel The Member Health Status panel displays the status of the PS Series array components. Table 316. Member Health Status Panel Field Status overview table Description Shortcut Displays the status of the member components. Each area is a link to the tab where more information is available. The status can be either: • OK - All elements are working within the valid operating range. A green checkmark indicates an OK status. • Warning - At least one element is operating outside the valid operating range. A yellow triangle indicates a Warning status. • Offline - This component is offline. A red icon indicates an Offline status. None Status is displayed for the following components: • Temperature • Cooling fans • Power supplies • Controllers • Disks • Interfaces • OPS panel or EIP panel (if present) Front view Displays an image of the front of the member. In some array models, the disks are seen from the front. You can hover the mouse over a component to display a tooltip containing more detailed information. Alt+F • Disks - Disk status, disk type, sector size, disk model, revision, size (capacity), speed, errors, and health reported. Rear view Displays an image of the rear of the member. You can hover the mouse over a component to display a tooltip containing more detailed information. Alt+R • Power supplies - Module number and status. Module 0 is on the right, module 1 is on the left. • OPS panel (depending on the array model) - Name only. • Control modules - Module number, status, boot time, battery status, and NVRAM battery status. Module 0 is on the right, module 1 is on the left. On a control module, you can hover over the serial ports and network ports to display more detailed information about them, including: • Serial interface - Name only. • Network interface ports - Port number, current status, date the status last changed, requested status, speed, MTU size, and packet errors. Inside view (not Displays an image of the inside of the member, depending on the array model. In Alt+I available on all models) arrays that show an inside view, the disks are shown in this view. You can hover the mouse over a component to display a tooltip containing more detailed information. • Disks - Drive slot number, status, disk type, sector size, disk model, revision, size (capacity), speed, and errors reported. 476 Reference: GUI Panels, Wizards, and Dialog Boxes