Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 103

clear line Reset a terminal line. C-Series, E-Series, S-Series, Z-Series Syntax Parameters clear line {line-number | aux 0 | console 0 | vty number} line-number aux 0 Enter a number for one of the 12 terminal lines on the system. Range: 0 to 11. Enter the keywords aux 0 to reset the auxiliary port. NOTE: This option is supported on the E-Series only. console 0 vty number Enter the keywords console 0 to reset the console port. Enter the keyword vty followed by a number to clear a terminal line. Range: 0 to 9. Command Modes Command History EXEC Privilege Version 8.3.11.1 Version 8.1.1.0 Version 7.6.1.0 Version 7.5.1.0 E-Series Introduced on the Z9000. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Original command. configure Enter CONFIGURATION mode from EXEC Privilege mode. C-Series, E-Series, S-Series, Z-Series Syntax Parameters configure [terminal] terminal (OPTIONAL) Enter the keyword terminal to specify that you are configuring from the terminal. Command Modes Command History EXEC Privilege Version 8.3.11.1 Version 8.1.1.0 Introduced on the Z9000. Introduced on the E-Series ExaScale. 103