Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 960

Version 7.6.1.0 Version 7.4.1.0 Introduced on the C-Series. Introduced on the E-Series. debug lldp interface Enable LLDP debugging to display timer events, neighbor additions or deletions, and other information about incoming and outgoing packets. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax Parameters debug lldp interface {interface | all}{events | packet {brief | detail} {tx | rx | both}} To disable debugging, use the no debug lldp interface {interface | all} {events} {packet {brief | detail} {tx | rx | both}} command. interface all events packet brief detail tx rx Enter the following keywords and slot/port or number information: • For a Fast Ethernet interface, enter the keyword FastEthernet followed by the slot/ port information. • For a 1-Gigabit Ethernet interface, enter the keyword gigabitEthernet followed by the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword tenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. NOTE: The FastEthernet option is not supported on the SSeries. (OPTIONAL) Enter the keyword all to display information on all interfaces. (OPTIONAL) Enter the keyword events to display major events such as timer events. (OPTIONAL) Enter the keyword packet to display information regarding packets coming in or going out. (OPTIONAL) Enter the keyword brief to display brief packet information. (OPTIONAL) Enter the keyword detail to display detailed packet information. (OPTIONAL) Enter the keyword tx to display transmit only packet information. (OPTIONAL) Enter the keyword rx to display receive only packet information. 960