Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 382

Defaults Command Modes Command History Usage Information mask Enter the mask of the IP address in the slash prefix length format (for example, /24). The mask appears in command outputs in dotted decimal format (A.B.C.D). Not configured. ROUTER BGP Version 8.3.11.1 Version 8.3.7.0 Version 7.8.1.0 Version 7.7.1.0 Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Although FTOS does not generate a route due to the backdoor config, there is an option for injecting/sourcing a local route in the presence of network backdoor config on a learned route. redistribute Redistribute routes into BGP. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax redistribute {connected | static} [route-map map-name] To disable redistribution, use the no redistribution {connected | static} command. Parameters connected static Enter the keyword connected to redistribute routes from physically connected interfaces. Enter the keyword static to redistribute manually configured routes. These routes are treated as incomplete routes. route-map mapname (OPTIONAL) Enter the keyword route-map followed by the name of an established route map. Only the following ROUTE-MAP mode commands are supported: • match ip address • set community • set local-preference • set metric • set next-hop • set origin • set weight If the route map is not configured, the default is deny (to drop all routes). 382