Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 384

Defaults Command Modes Command History Usage Information Example Related Commands route-map mapname with the destination protocol. The range is 0 to 16777215. The default is 0. Enter the keyword route-map followed by the map name that is an identifier for a configured route map. The route map filters imported routes from the source routing protocol to the current routing protocol. If you do not specify a map-name, all routes are redistributed. If you specify a keyword, but fail to list route map tags, no routes are imported. level-1-2 ROUTER BGP Version 8.3.1.0 Version 6.3.1.0 Introduced the ability to substitute IGP cost for MED when a peer/ peer-group outbound route-map is set as internal. Introduced With FTOS version 8.3.1.0 and later, you can use the redistribute command to advertise the IGP cost as the MED on redistributed routes. When you set the route-map with metric-type internal and applied outbound to an EBGP peer/peer-group, the advertised routes corresponding to those peer/peer-group have the IGP cost set as MED. IS-IS to BGP redistribution supports matching of level-1 or level-2 routes or all routes (default). You can perform more advanced match options using route maps. You can set the metric value of redistributed routes by the redistribution command. FTOS(conf)#router bgp 1 FTOS(conf-router_bgp)#redistribute isis level-1 metric 44 route-map rmap-is2bgp FTOS(conf-router_bgp)#show running-config bgp ! router bgp 1 redistribute isis level-1 metric 44 route-map rmap-is2bgp neighbor default-originate - injects the default route. redistribute ospf Redistribute OSPF routes into BGP. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax redistribute ospf process-id [[match external {1 | 2}] [match internal]] [route-map map-name] To stop redistribution of OSPF routes, use the no redistribute ospf process-id command. Parameters process-id Enter the number of the OSPF process. The range is 1 to 65535. 384