Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 1293

Version 8.3.7.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Authentication and Password Commands Use the following the commands to manage access to the system aaa authentication enable Configure AAA Authentication method lists for user access to EXEC privilege mode (the "Enable" access). C-Series, E-Series, S-Series, Z-Series, S4810 Syntax aaa authentication enable {default | method-list-name} method [... method2] To return to the default setting, use the no aaa authentication enable {default | method-list-name} method [... method2] command. Parameters default method-list-name method Enter the keyword default followed by the authentication methods to use as the default sequence of methods to be used for the Enable log-in. The default is default enable. Enter a text string (up to 16 characters long) to name the list of enabled authentication methods activated at log in. Enter one of the following methods: • enable - use the password defined by the enable password command in CONFIGURATION mode. • line - use the password defined by the password command in LINE mode. • none - no authentication. • radius - use the RADIUS server(s) configured with the radius-server host command. • tacacs+ - use the TACACS+ server(s) configured with the tacacs-server host command. ... method2 (OPTIONAL) In the event of a "no response" from the first method, FTOS applies the next configured method. Defaults Command Modes Use the enable password. CONFIGURATION 1293