Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 1471

Object Missing This object is not available in the repository. advertise-interval Set the time interval between VRRP advertisements. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax advertise-interval seconds To return to the default settings, use the no advertise-interval command. Parameters seconds Enter a number of seconds. The range is 1 to 255. The default is 1 second. Defaults Command Modes Command History 1 second INTERFACE-VRRP Version 8.3.11.1 Version 8.3.7.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.2.1.1 Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information Dell Force10 recommends keeping the default setting for this command. If you do change the time interval between VRRP advertisements on one router, you must change it on all routers. authentication-type Enable authentication of VRRP data exchanges. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax authentication-type simple [encryption-type] password To delete an authentication type and password, use the no authentication-type command. Parameters simple encryption-type Enter the keyword simple to specify simple authentication. (OPTIONAL) Enter one of the following numbers: • 0 (zero) specifies an un-encrypted authentication data will follow. • 7 (seven) specifies a hidden authentication data will follow. • LINE is the un-encrypted (cleartext) authentication data. 1471