Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 650

simply rely on GVRP for VLAN updates. But if the local bridge needs to know only how to reach a given VLAN, then GVRP provides all necessary information. • The VLAN topologies that GVRP learns are treated differently from VLANs that are statically configured. The GVRP dynamic updates are not saved in NVRAM, while static updates are saved in NVRAM. When GVRP is disabled, the system deletes all VLAN interfaces that were learned through GVRP and leaves unchanged all VLANs that were manually configured. clear gvrp statistics Clear GVRP statistics on an interface. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax Parameters clear gvrp statistics interface interface interface interface Enter the following keywords and slot/port or number information: • For a Fast Ethernet interface, enter the keyword FastEthernet followed by the slot/port information. • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Port Channel interface, enter the keywords portchannel followed by a number. For the C-Series and SSeries, the range is 1 to 128. For the E-Series, the range is 1 to 255 for TeraScale and 1 to 512 for ExaScale. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. Defaults Command Modes Command History Related Commands none EXEC Version 8.3.11.1 Version 8.3.7.0 Version 7.6.1.0 Introduced on the Z9000. Introduced on the S4810. Introduced on C-Series, E-Series, and S-Series show gvrp statistics - displays the GVRP statistics. 650