Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 689

clear dampening Clear the dampening counters on all the interfaces or just the specified interface. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax Parameters clear dampening [interface] interface (OPTIONAL) Enter any of the following keywords and slot/port or number to clear counters from a specified interface: • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Port Channel interface, enter the keywords portchannel followed by a number. For the C-Series and SSeries, the range is 1 to 128. For the E-Series, the range is 1 to 255 for TeraScale and 1 to 512 for ExaScale. • For a SONET interface, enter the keyword sonet followed by the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. Defaults Command Modes Command History Usage Information Example Related Commands Without an interface specified, the command clears all interface dampening counters. EXEC Privilege Version 8.3.11.1 Version 8.5.1.0 Version 8.3.7.0 Version 8.1.1.0 Version 7.6.1.0 Version 7.5.1.0 Version 7.4.1.0 Introduced on the Z9000. Added support for 4-port 40G line cards on ExaScale. Introduced on the S4810. Introduced on the E-Series ExaScale. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. On the S4810, after you enter the clear counters command and verify the results with the show interfaces command, the line rate is not reset to 0.00%. FTOS#clear dampening gigabitethernet 1/2 Clear dampening counters on Gi 1/2 [confirm] y FTOS# show interfaces dampening - displays interface dampening information. dampening - configures dampening on an interface. 689