Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 1299

Usage Information Related Commands Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Use this command to define a password for a level and use the privilege level (CONFIGURATION mode) command to control access to command modes. Passwords must meet the following criteria: • Start with a letter, not a number. • Passwords can have a regular expression as the password. To create a password with a regular expression in it, you must use CNTL + v prior to entering regular expression. For example, to create the password abcd]e, you type "abcd CNTL v ]e". When the password is created, you do not use the CNTL + v key combination and enter "abcd]e". NOTE: The question mark (?) and the tilde (~) are not supported characters. show running-config - views the current configuration. privilege level (CONFIGURATION mode) - controls access to the command modes within the switch. login authentication Apply an authentication method list to designated the terminal lines. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax login authentication {method-list-name | default} To use the local user/password database for login authentication, use the no login authentication command. Parameters method-list-name default Enter the keywords method-list-name to specify that method list, created in the aaa authentication login command, to be applied to the designated terminal line. Enter the keyword default to specify that the default method list, created in the aaa authentication login command, is applied to the terminal line. Defaults Command Modes Command History No authentication is performed on the console lines. Local authentication is performed on the virtual terminal and auxiliary lines. LINE Version 8.3.11.1 Version 8.3.7.0 Version 7.6.1.0 Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. 1299