Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 1426

Usage Information Example Related Commands You can change the order of the month and day parameters to enter the time and date as time day month year. In the switch, the hardware clock is separate from the software and is called the calendar. This hardware clock runs continuously. After the hardware clock (the calendar) is set, the FTOS automatically updates the software clock after system bootup. You cannot delete the hardware clock (calendar). To manually update the software with the hardware clock, use the clock readcalendar command. FTOS#calendar set 08:55:00 june 18 2006 FTOS# clock read-calendar - sets the software clock based on the hardware clock. clock set - sets the software clock. clock update-calendar - sets the hardware clock based on the software clock. show clock - displays the clock settings. clock read-calendar Set the software clock on the switch from the information set in hardware clock (calendar). C-Series, E-Series, S-Series, Z-Series, S4810 Syntax Defaults Command Modes Command History clock read-calendar Not configured. EXEC Privilege Version 8.3.11.1 Version 8.3.7.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information In the switch, the hardware clock is separate from the software and is called the calendar. This hardware clock runs continuously. After the hardware clock (the calendar) is set, the FTOS automatically updates the software clock after system bootup. You cannot delete this command (there is not a no version of this command). 1426