Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 889

Parameters interface Enter the following keywords and slot/port or number information: • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For Loopback interface, enter the keyword loopback followed by a number from zero (0) to 16383. • For a Port Channel interface, enter the keywords portchannel followed by a number. For the C-Series and SSeries, the range is 1 to 128. For the E-Series, the range is 1 to 255 for TeraScale and 1 to 512 for ExaScale. • For a SONET interface, enter the keyword sonet followed by the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a VLAN, enter the keyword vlan followed by a number from 1 to 4094. Defaults Command Modes Command History Usage Information Not configured. ROUTER ISIS Version 8.3.12.0 Introduced on the S4810. Although the passive interface neither sends nor receives routing updates, the network on that interface is still included in the IS-IS updates sent using other interfaces. redistribute Redistribute routes from one routing domain to another routing domain. E-Series, S4810 Syntax Parameters redistribute {static | connected | rip} [level-1 | level-1-2 | level-2] [metric metric-value] [metric-type {external | internal}] [route-map map-name] To end redistribution or disable any of the specified keywords, use the no redistribute {static | connected | rip} [metric metric-value] [metric-type {external | internal}] [level-1 | level-1-2 | level-2] [routemap map-name] command. connected rip static Enter the keyword connected to redistribute active routes into ISIS. Enter the keyword rip to redistribute RIP routes into IS-IS. Enter the keyword static to redistribute user-configured routes into IS-IS. 889