Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 1428

clock summer-time date Set a date (and time zone) on which to convert the switch to daylight saving time on a one-time basis. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax Parameters Defaults Command Modes Command History clock summer-time time-zone date start-month start-day startyear start-time end-month end-day end-year end-time [offset] To delete a daylight saving time zone configuration, use the no clock summer-time command. time-zone start-month start-day start-year start-time end-day end-month end-time end-year offset Enter the three-letter name for the time zone. This name is displayed in the show clock output. Enter the name of one of the 12 months in English. You can enter the name of a day to change the order of the display to time day month year. Enter the number of the day. The range is 1 to 31. You can enter the name of a month to change the order of the display to time day month year. Enter a four-digit number as the year. The range is 1993 to 2035. Enter the time in hours:minutes. For the hour variable, use the 24-hour format; example, 17:15 is 5:15 pm. Enter the number of the day. The range is 1 to 31. You can enter the name of a month to change the order of the display to time day month year. Enter the name of one of the 12 months in English. You can enter the name of a day to change the order of the display to time day month year. Enter the time in hours:minutes. For the hour variable, use the 24-hour format; example, 17:15 is 5:15 pm. Enter a four-digit number as the year. The range is 1993 to 2035. (OPTIONAL) Enter the number of minutes to add during the summertime period. The range is 1 to1440. The default is 60 minutes. Not configured. CONFIGURATION Version 8.3.11.1 Version 8.3.7.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. 1428