Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 1296

access-class Restrict incoming connections to a particular IP address in a defined IP access control list (ACL). C-Series, E-Series, S-Series, Z-Series, S4810 Syntax access-class access-list-name To delete a setting, use the no access-class command. Parameters access-list-name Enter the name of an established IP Standard ACL. Defaults Command Modes Command History Not configured. LINE Version 8.3.11.1 Version 8.3.7.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.2.1.1 Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Related Commands line - applies an authentication method list to the designated terminal lines. ip access-list standard - names (or selects) a standard access list to filter based on the IP address. ip access-list extended - names (or selects) an extended access list based on the IP addresses or protocols. enable password Change the password for the enable command. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax enable password [level level] [encryption-type] password To delete a password, use the no enable password [encryption-type] password [level level] command. Parameters level level encryption-type (OPTIONAL) Enter the keyword level followed by a number as the level of access. The range is 1 to 15. (OPTIONAL) Enter the number 7 or 0 as the encryption type. Enter a 7 followed by a text string as the hidden password. The text string must be a password that was already encrypted by a Dell Force10 router. 1296