Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 1304

Related Commands username - enables a user. timeout login response Specify how long the software waits for the login input (for example, the user name and password) before timing out. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax timeout login response seconds To return to the default values, use the no timeout login response command. Parameters seconds Enter a number of seconds the software waits before logging you out. The range is: • VTY: 1 to 30 seconds, the default is 30 seconds. • Console: 1 to 300 seconds, the default is 0 seconds (no timeout). • AUX: 1 to 300 seconds, the default is 0 seconds (no timeout). Defaults Command Modes Command History Usage Information See above. LINE Version 8.3.11.1 Version 8.3.7.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. The software measures the period of inactivity defined in this command as the period between consecutive keystrokes. For example, if your password is "password" you can enter "p" and wait 29 seconds to enter the next letter. username Establish an authentication system based on user names. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax username name [access-class access-list-name] [nopassword | {password | secret} [encryption-type] password] [privilege level] If you do not want a specific user to enter a password, use the nopassword option. To delete authentication for a user, use the no username name command. 1304