Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 1383

Related Commands E-Series legacy command logging on - enables the logging asynchronously to logging buffer, console, Syslog server, and terminal lines. logging trap - enables logging to the Syslog server based on severity. logging buffered Enable logging and specify which messages are logged to an internal buffer. By default, all messages are logged to the internal buffer. C-Series, E-Series, S-Series, Z-Series Syntax logging buffered [level] [size] To return to the default values, use the default logging buffered command. To disable logging stored to an internal buffer, use the no logging buffered command. Parameters level size (OPTIONAL) Indicate a value from 0 to 7 or enter one of the following equivalent words: emergencies, alerts, critical, errors, warnings, notifications, informational, or debugging. The default is 7 or debugging. (OPTIONAL) Indicate the size, in bytes, of the logging buffer. The number of messages buffered depends on the size of each message. The range is 40960 to 524288. The default is 40960 bytes. Defaults Command Modes Command History level = 7; size = 40960 bytes CONFIGURATION Version 8.3.11.1 Version 8.3.7.0 Version 7.6.1.0 Version 7.5.1.0 E-Series legacy command Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Usage Information Related Commands When you decrease the buffer size, all messages stored in the buffer are lost. Increasing the buffer size does not affect messages stored in the buffer. clear logging - clears the logging buffer. default logging buffered - returns the logging buffered parameters to the default setting. show logging - displays the logging setting and system messages in the internal buffer. 1383