Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 423

debug ip bgp updates View information about BGP updates. C-Series, E-Series TeraScale, S-Series Syntax debug ip bgp updates [in | out] To disable debugging, use the no debug ip bgp updates [in | out] command. Parameters updates in out Enter the keyword updates to view BGP update information. (OPTIONAL) Enter the keyword in to view only BGP updates received from neighbors. (OPTIONAL) Enter the keyword out to view only BGP updates sent to neighbors. Defaults Command Modes Command History Disabled. EXEC Privilege Version 7.8.1.0 Version 7.7.1.0 Version 7.6.1.0 Introduced on the S-Series. Introduced on the C-Series. Introduced IPv6 MGBP on the E-Series. distance bgp Configure three administrative distances for routes. C-Series, E-Series TeraScale, S-Series, S4810 Syntax distance bgp external-distance internal-distance local-distance To return to default values, use the no distance bgp command. Parameters external-distance internal-distance local-distance Enter a number to assign to routes learned from a neighbor external to the AS. The range is 1 to 255. The default is 20. Enter a number to assign to routes learned from a router within the AS. The range is 1 to 255. The default is 200. Enter a number to assign to routes learned from networks listed in the network command. The range is 1 to 255. The default is 200. Defaults • external-distance = 20 • internal-distance = 200 • local-distance = 200 Command Modes ROUTER BGP 423