Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 290

match origin Configure a filter to match routes based on the value found in the BGP path ORIGIN attribute. C-Series, E-Series, S-Series, Z-Series Syntax match origin {egp | igp | incomplete} To disable matching filter, use the no match origin {igp | egp | incomplete} command. Parameters egp igp incomplete Enter the keyword egp to match routes originating outside the AS. Enter the keyword igp to match routes originating within the same AS. Enter the keyword incomplete to match routes with incomplete routing information. Defaults Command Modes Command History Not configured. ROUTE-MAP Version 8.3.11.1 Version 8.1.1.0 pre-Version 6.1.1.0 Introduced on the Z9000. Introduced on the E-Series ExaScale. Introduced on the E-Series. match route-type Configure a filter to match routes based on the how the route is defined. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax match route-type {external [type-1 | type-2] | internal | level-1 | level-2 | local} To delete a match, use the no match route-type {local | internal | external [type-1 | type-2] | level-1 | level-2} command. Parameters external [type-1| type-2] internal level-1 level-2 local Enter the keyword external and then enter either type-1 or type-2 to match only on OSPF Type 1 routes or OSPF Type 2 routes. Enter the keyword internal to match only on routes generated within OSPF areas. Enter the keyword level-1 to match IS-IS Level 1 routes. Enter the keyword level-2 to match IS-IS Level 2 routes. Enter the keyword local to match only on routes generated within the switch. 290