Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 646

Command History Usage Information Usage Information Example (Summary) Example (1) Example (2 Summary) Related Commands Version 8.3.11.1 Version 8.3.7.0 Version 8.2.1.0 Version 7.4.1.0 Introduced on the Z9000. Introduced on the S4810. Introduced on the C-Series. Introduced. Executing this command without the optional ring-id command clears the statistics counters on all the available rings. FTOS requires a command line confirmation before the command executes. This commands clears the following counters: • hello Rx and Tx counters • Topology change Rx and Tx counters • The number of state change counters Executing this command without the optional ring-id command clears the statistics counters on all the available rings. FTOS requires a command line confirmation before the command is executed. This commands clears the following counters: • hello Rx and Tx counters • Topology change Rx and Tx counters • The number of state change counters FTOS#show frrp summary Ring-ID State Mode Ctrl_Vlan Member_Vlans 2 UP Master 2 11-20, 25,27-30 31 UP Transit 31 40-41 50 Down Transit 50 32 FTOS# FTOS#show frrp 1 Ring protocol 1 is in Master mode Ring Protocol Interface: Primary : GigabitEthernet 0/16 State: Forwarding Secondary: Port-channel 100 State: Blocking Control Vlan: 1 Ring protocol Timers: Hello-Interval 50 msec Dead-Interval 150 msec Ring Master's MAC Address is 00:01:e8:13:a3:19 Topology Change Statistics: Tx:110 Rx:45 Hello Statistics: Tx:13028 Rx:12348 Number of state Changes: 34 Member Vlans: 1000-1009 FTOS# FTOS#show frrp 2 summary FTOS#show frrp 2 summary Ring-ID State Mode Ctrl_Vlan Member_Vlans 2 Up Master 2 11-20, 25, 27-30 FTOS# protocol frrp - enters the resilient ring protocol and designate a ring identification. 646