Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 63

cd Change to a different working directory. C-Series, E-Series, S-Series Syntax Parameters cd directory directory (OPTONAL) Enter one of the following: • flash: (internal Flash) or any sub-directory • slot0: (external Flash) or any sub-directory (C-Series and E-Series only) Command Modes Command History EXEC Privilege Version 7.6.1.0 Version 7.5.1.0 E-Series Introduced on S-Series Introduced on C-Series Original command change bootflash-image Change boot flash image from which to boot. C-Series, E-Series Syntax Parameters Defaults Command Modes Command History change bootflash-image {cp | linecard linecard-slot | rp} cp linecard linecardslot rp Enter the keyword cp to change the bootflash image on the control processor on the RPM. Enter the keyword linecard followed by the slot number to change the bootflash image on a specific line card. The C-Series range is 0-7. The E-Series range is 0 to 13 on the E1200, 0 on 6 on the E600, and 0 to 5 on the E300. Enter the keyword rp to change the bootflash image on the RPM. Not configured EXEC Privilege Version 7.5.1.0 E-Series Introduced on C-Series Original command 63