Dell Force10 Z9000 FTOS Command Line Reference Guide for the Z9000 System FTOS - Page 1041

clear ip ospf Clear all OSPF routing tables. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax Parameters clear ip ospf process-id [process] process-id process Enter the OSPF Process ID to clear a specific process. If no Process ID is entered, all OSPF processes are cleared. (OPTIONAL) Enter the keyword process to reset the OSPF process. Command Modes Command History EXEC Privilege Version 8.3.11.1 Version 8.3.7.0 Version 7.8.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.1 Introduced on the Z9000. Introduced on the S4810. Added support for the Multi-Process OSPF. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. clear ip ospf statistics Clear the packet statistics in interfaces and neighbors. C-Series, E-Series, S-Series, Z-Series, S4810 Syntax Parameters clear ip ospf process-id statistics [interface name {neighbor router-id}] process-id interface name Enter the OSPF Process ID to clear a specific process. If no Process ID is entered, all OSPF processes are cleared. (OPTIONAL) Enter the keyword interface followed by one of the following interface keywords and slot/port or number information: • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For Port Channel groups, enter the keywords portchannel followed by a number. For the C-Series and SSeries, the range is 1 to 128. For the E-Series, the range is 1 to 255 for TeraScale. • For a SONET interface, enter the keyword sonet followed by the slot/ port information. 1041