Dell PowerEdge R750xa EMC Installation and Service Manual - Page 159
Installing the LOM card and rear I/O board, Installing the liquid cooling
![]() |
View all Dell PowerEdge R750xa manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
NOTE: The procedure to install the liquid cooling rear I/O board and rear I/O board is same. Steps 1. Align the connectors and slots on the LOM card or rear I/O board with the connector and standoffs on the system board. 2. Press the LOM card or rear I/O board until firmly seated on the system board connector. 3. Using a Phillips #2 screwdriver, secure the LOM card or rear I/O board to the system board with screws. Figure 170. Installing the LOM card and rear I/O board Figure 171. Installing the liquid cooling rear I/O board Next steps 1. Install the system board. 2. Follow the procedure listed in After working inside your system. Installing and removing system components 159
![](/manual_guide/products/dell-poweredge-r750xa-emc-installation-service-manual-e03ec2d/159.png)
NOTE:
The procedure to install the liquid cooling rear I/O board and rear I/O board is same.
Steps
1.
Align the connectors and slots on the LOM card or rear I/O board with the connector and standoffs on the system board.
2.
Press the LOM card or rear I/O board until firmly seated on the system board connector.
3.
Using a Phillips #2 screwdriver, secure the LOM card or rear I/O board to the system board with screws.
Figure 170. Installing the LOM card and rear I/O board
Figure 171. Installing the liquid cooling rear I/O board
Next steps
1.
Install the system board
.
2.
Follow the procedure listed in
After working inside your system
.
Installing and removing system components
159