Dell PowerEdge R750xa EMC Installation and Service Manual - Page 39
Cooling fans, Removing the cooling fan cage assembly
![]() |
View all Dell PowerEdge R750xa manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Figure 32. Installing the left air shroud Next steps 1. Install the air shroud. 2. Follow the procedure listed in After working inside your system. Cooling fans Removing the cooling fan cage assembly Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. Follow the procedure listed in the Before working inside your system. 3. If installed, remove the air shroud. 4. Disconnect the cables from system board that pass through the cooling fan cage assembly cable latch. 5. Open cable access latch to remove the cables and place them towards system front. Steps 1. Lift the blue release levers to unlock the cooling fan cage assembly from the system. 2. Hold the release levers, and lift the cooling fan cage assembly away from the system. Installing and removing system components 39
![](/manual_guide/products/dell-poweredge-r750xa-emc-installation-service-manual-e03ec2d/39.png)