Dell PowerEdge R750xa EMC Installation and Service Manual - Page 77
Press the retaining clip on the four sides
![]() |
View all Dell PowerEdge R750xa manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Figure 68. Press the retaining clip on the four sides 4. If you are using an existing heat sink, remove the thermal grease from the heat sink by using a clean lint-free cloth. 5. Use the thermal grease syringe included with your processor kit to apply the grease in a thin spiral design on the bottom of the heat sink. CAUTION: Applying too much thermal grease can result in excess grease coming in contact with and contaminating the processor socket. NOTE: The thermal grease syringe is intended for single use only. Dispose the syringe after you use it. Installing and removing system components 77
![](/manual_guide/products/dell-poweredge-r750xa-emc-installation-service-manual-e03ec2d/77.png)
Figure 68. Press the retaining clip on the four sides
4.
If you are using an existing heat sink, remove the thermal grease from the heat sink by using a clean lint-free cloth.
5.
Use the thermal grease syringe included with your processor kit to apply the grease in a thin spiral design on the bottom of
the heat sink.
CAUTION:
Applying too much thermal grease can result in excess grease coming in contact with and
contaminating the processor socket.
NOTE:
The thermal grease syringe is intended for single use only. Dispose the syringe after you use it.
Installing and removing system components
77