Dell PowerEdge R750xa EMC Installation and Service Manual - Page 9
Dell EMC PowerEdge R750xa system overview, Front view of the system
View all Dell PowerEdge R750xa manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
2 Dell EMC PowerEdge R750xa system overview The Dell EMC PowerEdge R750xa is a dual socket, 2U rack system that supports: ● Two 3rd Generation Intel Xeon Scalable processors, with up to 40 cores per processor ● 32 DDR4 DIMM slot ● Two redundant AC or DC power supply units ● Up to 8 x 2.5-inch SAS/SATA/NVMe drives or 6 x 2.5-inch NVMe drives NOTE: For more information about how to hot swap NVMe PCIe SSD U.2 device, see the Dell Express Flash NVMe PCIe SSD User's Guide at https://www.dell.com/support Browse all Products > Data Center Infrastructure > Storage Adapters & Controllers > Dell PowerEdge Express Flash NVMe PCIe SSD > Documentation > Manuals and Documents. NOTE: All instances of SAS, SATA drives, PCIe SSDs, and NVMe are referred to as drives in this document, unless specified otherwise. CAUTION: Do not install GPUs, network cards, or other PCIe devices on your system that are not validated and tested by Dell. Damage caused by unauthorized and invalidated hardware installation will null and void the system warranty. NOTE: For more information, see the Dell EMC PowerEdge R750xa Technical Specifications on the product documentation page. Topics: • Front view of the system • Rear view of the system • Inside the system • Locating the Express Service Code and Service Tag • System information label • Rail sizing and rack compatibility matrix Front view of the system Figure 1. Front view of the 8 x 2.5-inch drive system Dell EMC PowerEdge R750xa system overview 9