Dell PowerEdge R750xa EMC Installation and Service Manual - Page 41
Removing a cooling fan, Installing the cooling fan cage assembly
View all Dell PowerEdge R750xa manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Figure 34. Installing the cooling fan cage assembly Next steps 1. If removed, install the air shroud. 2. Insert the cables into cables access latch and close cable access latch. 3. Connect the cables to system board that pass through the cooling fan cage assembly cable latch. 4. Follow the procedure listed in After working inside your system. Removing a cooling fan Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. Follow the procedure listed in Before working inside your system. Steps Press the orange release tab and lift the cooling fan to disconnect the fan from the connector on the system board. WARNING: Ensure not to tilt or rotate the cooling fan while removing from the system. Installing and removing system components 41