Dell PowerEdge R750xa EMC Installation and Service Manual - Page 51
Installing a NVMe drive blank, Removing a NVMe drive blank
View all Dell PowerEdge R750xa manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Figure 45. Removing a NVMe drive blank Next steps 1. Replace the NVMe drive blank. Installing a NVMe drive blank Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. If installed, remove the front bezel. 3. Remove all drives. CAUTION: For proper system cooling, drive blanks must be installed in all empty drive slots. NOTE: NVMe drive blank is applicable for the system with x6 NVMe drive configuration. Steps Slide the NVMe drive blank into the drive slot, until clicks into place. Installing and removing system components 51
Figure 45. Removing a NVMe drive blank
Next steps
1.
Replace the NVMe drive blank
.
Installing a NVMe drive blank
Prerequisites
1.
Follow the safety guidelines listed in the
Safety instructions
.
2.
If installed,
remove the front bezel
.
3.
Remove all drives
.
CAUTION:
For proper system cooling, drive blanks must be installed in all empty drive slots.
NOTE:
NVMe drive blank is applicable for the system with x6 NVMe drive configuration.
Steps
Slide the NVMe drive blank into the drive slot, until clicks into place.
Installing and removing system components
51