Dell PowerEdge R750xa EMC Installation and Service Manual - Page 54
Drive backplane, Table 14. Supported backplane options
View all Dell PowerEdge R750xa manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Figure 48. Installing the rear mounting front PERC module Next steps 1. Connect all the cables to rear mounting front PERC module. NOTE: Route the cable properly to prevent the cable from being pinched or crimped. 2. Install the drive backplane cover. 3. Follow the procedure listed in After working inside your system. Drive backplane This is a service technician replaceable part only. Drive backplane Depending on your system configuration, the drive backplane supported is listed here: Table 14. Supported backplane options System PowerEdge R750xa Supported hard drives options 2.5-inch (x 8) Universal backplane 54 Installing and removing system components
Figure 48. Installing the rear mounting front PERC module
Next steps
1.
Connect all the cables to rear mounting front PERC module.
NOTE:
Route the cable properly to prevent the cable from being pinched or crimped.
2.
Install the drive backplane cover
.
3.
Follow the procedure listed in
After working inside your system
.
Drive backplane
This is a service technician replaceable part only.
Drive backplane
Depending on your system configuration, the drive backplane supported is listed here:
Table 14. Supported backplane options
System
Supported hard drives options
PowerEdge R750xa
2.5-inch (x 8) Universal backplane
54
Installing and removing system components