Garmin GNC 420W Pilots Guide - Page 112
Entering a waypoint identifier, right, Entering a waypoint facility name or city, location
![]() |
View all Garmin GNC 420W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
SECTION 7 WPT PAGES Entering a waypoint identifier: 1) Select the desired WPT page and press the small right knob to activate the cursor. 2) Turn the small right knob to select the first character of the waypoint's identifier. 3) Turn the large right knob to select the next character field. 4) Turn the small right knob to select the desired character. 5) Repeat steps 3 and 4 until the identifier is selected, then press the ENT Key. 6) To remove the flashing cursor, press the small right knob. Entering a waypoint facility name or city location: 1) Select the Airport Location Page, NDB Page, or VOR Page from the WPT Page Group (as described on the preceding page). 2) Press the small right knob to activate the cursor. 3) Turn the large right knob to select the facility name or location (city) field. 4) Turn the small right knob to select the desired character (Figure 7-2). 5) Turn the large right knob to select the next character field. 6) Repeat steps 4 and 5 until the facility name or location is selected, then press the ENT Key (Figures 7-3 and 7-4). Figure 7-3 Airport Location Page Figure 7-4 VOR Page 7) To remove the flashing cursor, press the small right knob. Figure 7-2 Airport Location Page 7-2 GNC 420(A) Pilot's Guide and Reference 190-00140-20 Rev. K
![](/manual_guide/products/garmin-gnc-420w-pilots-guide-8f6f648/112.png)