Garmin GNC 420W Pilots Guide - Page 65

SECTION 4 DIRECT-TO NAVIGATION Selecting a direct-to destination from the active flight plan: 1) Press the Direct-to Key. The Select Direct-to Waypoint Page appears, with the waypoint identifier field highlighted. 2) Turn the large right knob to highlight the flight plan (FPL) field (Figure 4-6). Figure 4-6 Highlighted Flight Plan Field Selecting the Nearest Airport as a Direct-to Destination The Select Direct-to Waypoint Page always displays the nearest airports (from the present position) in the NRST field. Nearby airports may also be selected as direct-to destinations using the steps described in Section 8.1. Selecting a nearby airport as a direct-to destination: 1) Press the Direct-to Key. The Select Direct-to Waypoint Page appears, with the waypoint identifier field highlighted. 2) Turn the large right knob to highlight the nearest airport (NRST) field. 3) Turn the small right knob to display a window showing up to nine nearby airports (Figure 4-8). 3) Turn the small right knob to display a window showing all waypoints in the active flight plan (Figure 4-7). Figure 4-7 FPL (Flight Plan) Window 4) Continue turning the small right knob to scroll through the list and highlight the desired waypoint. 5) Press the ENT Key to confirm the selected waypoint, and press the ENT Key again to activate the direct-to function. Figure 4-8 Nearest Window 4) Continue turning the small right knob to scroll through the list and highlight the desired airport. 5) Press the ENT Key to confirm the selected airport, and press the ENT Key again to activate the direct-to function. 190-00140-20 Rev. K GNC 420(A) Pilot's Guide and Reference 4-3