Garmin GNC 420W Pilots Guide - Page 198

SECTION 11 ADDITIONAL FEATURES Traffic Page Display Range Various display ranges can be selected for optimal display of TIS traffic information. Changing the display range on the Traffic Page: Press the RNG Key to zoom through the range selections which are: 12/6 nm, 6/2 nm, and 2 nm. Map Page TIS traffic is displayed on the Map Page (Figure 11-15) in addition to the Traffic Page. When a Traffic Advisory is active, the Traffic Banner is displayed in the lower right corner of the Map Page. Traffic Advisory Banner TRAFC LBL - Allows the user to select at what map range the altitude trend arrow and altitude deviation indicator appear. Figure 11-16 Traffic Mode Selection Window Configuring TIS traffic on the Map Page: 1) Turn the small right knob to select the Map Page. 2) Press the MENU key. Turn the small right knob to select 'Setup Map'? 3) The flashing cursor highlights the GROUP field. Turn the small right knob to select 'Traffic' (Figure 11-17) and press the ENT Key. Figure 11-15 Map Page Displaying Traffic The Traffic Mode Selection Menu (Figure 11-16) allows the user to choose from the following options: TRAFC Mode: • All trfc - All traffic is displayed on the Map Page • TA/PA - Only traffic and proximity advisories are displayed on the Map Page (proximity advisories are not applicable to TIS configuration) • TA only - Only traffic advisories are displayed on the Map Page TRAFC SMBL - Allows the user to select the map range at which the traffic symbol(s) and TA text appear. Figure 11-17 Map Setup Window 4) Turn the large right knob to select the desired Traffic Mode option. Turn the small right knob to select the desired option and press the ENT Key. Repeat the step for Traffic Symbol and Traffic Label. 5) Press the CLR Key to return the Map Page. 11-8 GNC 420(A) Pilot's Guide and Reference 190-00140-20 Rev. K