Garmin GNC 420W Pilots Guide - Page 48
Selecting Desired On-Screen Data, Restoring Factory Settings, Turning the data fields off/on, right - gnc 420 installation
View all Garmin GNC 420W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
SECTION 3 NAV PAGES Turning the data fields off/on: Turn the large right knob to highlight 'Data Fields Off?' (or 'Data Fields On?') and press the ENT Key. Selecting Desired On-Screen Data 'Change Fields?' allows the pilot to choose the data displayed on the four user-selectable data fields along the right-hand side of the Map Page. There are fourteen available data types, including bearing to destination, distance to destination, estimated time of arrival, ground speed, minimum safe altitude, and track. See Section 12.3 for descriptions of these (and other) navigation terms. Changing a data field: 1) From the Map Page Menu, turn the large right knob to highlight 'Change Fields?' (Figure 323) and press the ENT Key. Figure 3-23 Map Page Menu 2) Turn the large right knob to highlight the data field to be changed. 3) Turn the small right knob to select the desired type of data (Figure 3-24) to appear on this field and press the ENT Key. Figure 3-24 Select Data Field Window 4) Press the small right knob to remove the cursor. NOTE: The on-screen traffic information occupies two data fields, leaving room to display only two additional data types. Traffic information is only available when the GNC 420 installation includes connection to traffic information sources. See Section 11, Additional Features. Restoring Factory Settings 'Restore Defaults?' resets all four user-selectable data fields to their original factory default settings. Restoring the factory default settings: From the Map Page Menu, turn the large right knob to highlight 'Restore Defaults?' (Figure 3-25) and press the ENT Key. Figure 3-25 Map Page Menu 3-14 GNC 420(A) Pilot's Guide and Reference 190-00140-20 Rev. K