Garmin GNC 420W Pilots Guide - Page 158
Flight Planning Scheduler, right, Entering a scheduled message
View all Garmin GNC 420W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
SECTION 9 AUX PAGES • Active Flight Plan - Transfer the active flight plan to/from a second 400/500-series Garmin unit in a dual unit installation. This option is the default when selecting 'Crossfill' from the Active Flight Plan Page. • Flight Plan - Transfer any stored flight plan to/from a second 400/500-series unit, by selecting the flight plan by number. This option is the default when selecting 'Crossfill' from the Flight Plan Catalog Page. See also Section 5.1, Flight Plan Catalog Page Options. • User Waypoints (all) - Transfer all stored user waypoints to/from a second 400/500-series unit. • User Waypoint - Transfer the specified user waypoint to a second 400/500-series unit. 4) Continue turning the small right knob to select the desired data option. Press the ENT Key when finished. 5) For a stored flight plan ('Flight Plan' data option), the flight plan number field is highlighted. Turn the small right knob to select the desired flight plan and press the ENT Key. 6) For a specified user waypoint ('User Waypoint' data option), the waypoint identifier field is highlighted. Use the small and large right knobs to enter the identifier of the desired user waypoint. Press the ENT Key when finished. 7) The flashing cursor moves to the 'CROSS-SIDE' field. Turn the small right knob to select 'To' or 'From' and press the ENT Key. 8) The flashing cursor moves to the 'Initiate Transfer?' confirmation field (Figure 9-26). Press the ENT Key to transfer the selected data. Figure 9-26 'Initiate Transfer' Highlighted Flight Planning Page: Scheduler Entering a scheduled message: 1) Select 'Scheduler' from the Flight Planning Page, using the steps described in this section. 2) The flashing cursor highlights the first message field. If necessary, turn the large right knob to highlight the first blank message field. 3) Use the small and large right knobs to enter the message text. Press the ENT Key when finished. (The GNC 420 stores up to nine scheduled messages holding 20 characters each.) 9-10 GNC 420(A) Pilot's Guide and Reference 190-00140-20 Rev. K